Our Guide to Epoxy Laminating Pastes

John Burn Epoxy Laminating Pastes

As the exclusive UK distributor of RAMPF, we stock a wide range of RAMPF tooling products including RAKU-TOOL® boards, Close Contour and liquid materials and laminating, casting and multi-purpose systems, including epoxy laminating pastes.

RAMPF RAKU-TOOL® EL-2207-2, EH-2907-2 and EH-2971 epoxy laminating pastes have been designed to work effectively with laminated shells, jigs and fixtures and applications for the reinforcement of moulds and tooling aids.

Working as a laminating system replacement for models, moulds and tooling aids, these pastes can be applied easily and effectively in a number of easy steps:

John Burn Epoxy Laminating Pastes 1.  Apply mould release agent to mould/pattern John Burn Epoxy Laminating Pastes 5.  Hand or machine mix paste and hardener until a homogeneous “streak free” dough is achieved
John Burn Epoxy Laminating Pastes 2.  Apply gel coat to mould/pattern John Burn Epoxy Laminating Pastes 6.  Roll into sheet or small sized “patties” of desired thickness
John Burn Epoxy Laminating Pastes 3.  Apply coupling coat John Burn Epoxy Laminating Pastes 7.  Overlay firmly to all surfaces avoiding air entrapment. Tamp down to form an even surface
John Burn Epoxy Laminating Pastes 4.  Prepare laminating paste and hardener John Burn Epoxy Laminating Pastes 8. Allow to cure and demould the finished product

Ensure processing and material temperature is between 20-25°C.

RAMPF Epoxy Laminating Pastes are available to purchase from John Burn. Please contact info@johnburn.co.uk to enquire.

Learn more about this range.