John Burn has the most comprehensive range of patternshop supplies in the industry.

Bits & Cutters

A range of forstner and saw tooth centre bits & router, TCT and milling cutters.

Dowels

An impressive range of dowwels including circular malleable iron (68, 69, 70s), steel and brass plug and socket, master and corebox dowels.

Tools

Stocks of quality tools from woodworking tools, contraction rules and clamps, to a variety of measuring equipment.

Fastening & fixings

A wide variety of products such as pozi and masta screws, panel pins, nails, toggle clips and several tpes of lifting plates and straps.


Bits & Cutters

  Code Product Notes BIT 01 020 3/4″ FORSTNER pattern machine BITS. Shank 1/2″ dia. x 6″ long. Bit is guided by its circular rim and will bore clean, true, flat bottomed holes unaffected by knots or grain direction. Overall length approx. 6″. Other sizes are available on request. BIT 01 030 1″ BIT 01 040 1.1/4″ BIT 01 050 ... Read More

Clips & Clamps

  Code Product Unit Notes FIX 11 000 Small clip 25-507 Pack 10 TOGGLE CLIPS – a quick and simple method of holding coreboxes together. Easily replaced, rust resistant finish. FIX 11 001 Small catchplate 01-507 Pack 10 FIX 11 005 Large clip 30-502 Pack 10 FIX 11 006 Large catchplate 05-502 Pack 10 FIX 11 010 Spring clip 30-521 ... Read More

Dowels & Locators

  Code Product Unit Notes FIX 06 004B No. 68 Pegs 1.1/2″ Pack 10 CIRCULAR DOWELS – malleable iron dowels. Machined edges, pegs, bores and location points. Fully interchangeable with 3 countersunk holes in each FIX 06 005B No. 68 Plates 1.1/2″ Pack 10 FIX 06 002B No. 69 Pegs – 1.1/4″ Pack 10 FIX 06 003B No. 69 Plates ... Read More

Pins & Nails

  Code Product Unit Notes FIX 04 002 1/2″ x 20 (12.5/13mm x 0.90) 1kg Steel PANEL PINS – stocked in a range of sizes and guages. FIX 04 010 3/4″ x 16 (20mm x 1.60) 0.5kg FIX 04 011 *3/4″ x 17 (19/20mmx1.40) 0.5kg FIX 04 012 3/4″ x 18 (19/20mmx1.25) 0.5kg FIX 04 020 1″ x 16 (25mm ... Read More

Screws

  Code Product Unit Notes FIX 01 003 *5/8″ x 4 Box 200 POZISCREWS – countersunk, steel woodscrews FIX 01 009 *3/4″ x 4 Box 200 FIX 01 010 3/4″ x 6 Box 200 FIX 01 011 3/4″ x 8 Box 200 FIX 01 020 1″ x 6 Box 200 FIX 01 021 1″ x 8 Box 200 FIX 01 ... Read More

Lifting Plates, Rapping Plates & Straps

  Code Product Unit Notes FIX 17 001B No. 101 – 1″ (1/4″ thick 1/4″ whit.) Pack 10 CIRCULAR STEEL LIFTING PLATES – Mild steel, designed for heavy duty work where larger lifting plates are not practical. Easily fitted with forstner or centre bits. FIX 17 002B No. 102 – 1.1/4″ (5/16″ thick 5/16″ whit.) Pack 10 FIX 17 003B ... Read More

Moulding Board Bushes

  Code Product Unit Notes FIX 20 000B 1/2″ Round Box 10 Mild steel with zinc plated rust resistant finish. Easy to apply and interchangeable. Round or elongated bores – tolerance of -.000 + .002. 2.1/4″ dia. Flange x 1/4″ thick. Body 1.1/4″ dia. Overall thickness 20mm. 3 No. 10 countersunk screw holes. FIX 20 001B 5/8″ Round Box 10 ... Read More

Moulding Board Plates

  Code Product Unit Notes FIX 20 021B 5/8″ Round Box 10 Mild steel with round or elongated bores – tolerance -.000″ + .002″. Fully interchangeable with FIX20 Moulding Board Bushes. 2.1/4″ dia. x 1/4″ thick with 3 No. 8 countersunk screw holes. FIX 20 022B 3/4″ Round Box 10 FIX 20 023B **7/8″ Round Box 10 FIX 20 024B ... Read More

Fastenings

  Code Product Unit Notes FIX 21 001 Corrugated Fasteners 3/4″ x 5 Box 1000 Steel divergent type – with 5 corrugations to the inch FIX 21 002 *Corrugated Fasteners 3/4″ x 6 Box 1000 FIX 23 000B Pinch Dog 2″ Pack 10 Drop forged steel FIX 24 000B Corner Discs 1″ Pack 100 Mild steel, 1″ diameter x 1/8″ ... Read More

Measuring Tools

  Code Product Notes TOO 05 002 *Inside Caliper – No.51 8″ Moore & Wright TOO 05 005 *Outside Caliper – No.52 8″ TOO 05 010 *Caliper In/Out 6 No. 976 Sorby TOO 06 003 *Dividers 3″ Moore & Wright No. 50  

Chisels

  Code Product Notes TOO 08 005 *1.1/4″ CHISELS – Long thin bevel edge paring TOO 08 006 *1.1/2″ TOO 08 014 **1.1/4″ CHISELS – Long thin cranked neck paring TOO 08 020 *1/8″ CHISELS – Bevel edge firmer TOO 08 031 *3/4″ Diamond Point CHISELS – Wood turning TOO 08 040 *1/2″ Round Nose TOO 08 042 *1″ Round ... Read More

Gouges

  Code Product Notes TOO 10 039 *1/4″ x 316″ radius GOUGES – Long thin pairing TOO 10 042 *3/4″ x 7/16″ radius TOO 10 043 *1″ x 5/8″ radius TOO 10 044 *1.1/4″ x 3″ radius TOO 10 046 **1″ x 3/4″ radius TOO 10 030 *1/4″ x 1/8″ radius GOUGES – Long thin cranked neck pairing TOO 10 ... Read More

Miscellaneous Supplies

  Code Product Unit Notes ANC 01 000 *1/8″ SILVER STEEL – round 333mm section ANC 01 001 3/16″ ANC 01 002 1/4″ ANC 01 003 5/16″ ANC 01 004 3/8″ ANC 02 000 *Bearings 15mm MACHINE SPARES – for Phillipson CBS1 machines ANC 02 001 *Bearings 30/40/50mm TOO 17 000 *TCT Scriber with Clip No.3540 For marking/setting out TOO ... Read More

Corebox Vents - Brass

  Code Product Unit Notes VEN 03 006 6mm Taper Pack 50 Brass corebox vents with 0.3mm taper slots VEN 03 008 8mm Taper Pack 50 VEN 03 010 10mm Taper Pack 50 VEN 03 012 12mm Taper Pack 50 VEN 03 020 *20mm Taper Pack 50 VEN 04 006 *6mm with .4mm SS mesh Pack 50 With stainless steel ... Read More

Corebox Vents - Steel

  Code Product Unit Notes VEN 05 000 **1/8″ .010 Pack 50 Steel corebox vents with either .010″ or .016 slots. 3/32″ thick head to allow for contouring. 5/16″ deep with knurled perifery to enable them to be fitted into a plain drilled hole. Easily replaced and fully interchangeable. VEN 05 002 **1/4″ .010 Pack 50 VEN 05 008 **1″ ... Read More

Rules and Tape Measures

  Code Product Notes TOO 01 003 *300mm 2.0% 1/50 Steel CONTRACTION RULES – 300mm, 500mm, 1 metre & 2 metre with contractions of 0.5, 0.8, 1, 1.25, 2, 2.25 & 2.5%. TOO 01 021 *1m 0.8% 1/125 TOO 01 206B **B2 6″ Steel CONTRACTION RULES with full satin chrome rust resistant finish. 4 contractions on each rule to reduce ... Read More

Corebox Vents - Aluminium

  Code Product Unit Notes VEN 09 006 *6mm Slotted Pack 50 With .010 slots, 8mm thick, developed for use on expanded polystyrene moulds. Resistant to electrolytic erosion of mould. VEN 09 008 *8mm Slotted Pack 50 VEN 09 010 *10mm Slotted Pack 50 VEN 09 012 *12mm Slotted Pack 50 VEN 10 006 *6mm Pin Holes Pack 50 Aluminium ... Read More

Tools

  Code Product Notes TOO 12 011 *Plane Blade 2″ Stanley TOO 13 003 *File 10″ Millenicut – Hand TOO 16 000 Bessey Clamp TG20 Quick action with malleable iron jaws, wooden handle and tempered steel fluted bar TOO 16 001 *Bessey Clamp TG25 (4.3/4″ jaw, 10″ opening) TOO 16 002 *Bessey Clamp TG30 (5.1/2″ jaw, 12″ opening) TOO 16 ... Read More

Wood Turning Tools

  Code Product Notes TOO 08 031 *3/4″ Diamond Point CHISELS – Wood turning TOO 08 042 *1″ Round Nose TOO 08 052 *1″ Square End TOO 08 060 *3/4″ Skew TOO 08 061 *1″ Skew TOO 11 002 *1/2″ Wood Turning Wood turning parting tools